sdlc/skills/analyze/SKILL.md

name, description

name

description

analyze

SDLC analysis stage. Gate on capability tags enforced in code by sdlc-gate (analyze requires reasoning-max), pick a plan from PLAN_CONTENTS first, then confirm that plan's source branch and question until consensus per references/consensus.md. Analyze its user stories against the current state (working directory plus REPO_{HASH} inventory for reuse), then run WBS with a standalone delivery/handover WP-01, CPM estimates and TDD todos. Write wiki page ANALYZE_{HASH} with real sample data into the ANALYZE wiki repo, upsert every directory row (ANALYZE_CONTENTS, PLAN_CONTENTS, REPO_CONTENTS - all in the separate CONTENTS repo) through jsc-gitea/tools/wiki-contents.sh with absolute wiki-url links, then close with tools/stage-report.sh - model tag verdict, worklog link, every wiki link written; logic only - never write code or modify files. Use after planning and before implementation; not for writing code (that is implement), and not before a plan exists in PLAN_CONTENTS.

analyze

Goal: create or extend the wiki analysis page ANALYZE_{HASH}. This skill is a logic-only stage: never output code, and never modify any file.

{HASH} = the shared wiki hash for {owner}/{repo}, computed by jsc-gitea/tools/hash-id (see jsc-gitea:wiki). It prints the full 40-character uppercase SHA-1 of its input — no truncation to 8 characters, no prefix rewrite. Never shorten it by hand: a shortened name points at a page nobody else writes to. REPO_{HASH} runs the same command over that repository's own {owner}/{repo}, so a multi-repository analysis holds one inventory page per repository.

Content pages and directory pages live in different wiki repos. ANALYZE_{HASH} sits in the repo jsc-gitea/tools/gitea.sh wiki-repo ANALYZE resolves, REPO_{HASH} in the one gitea.sh wiki-repo REPO resolves. All three directory pages — ANALYZE_CONTENTS, PLAN_CONTENTS and REPO_CONTENTS — sit in the repo gitea.sh wiki-repo CONTENTS resolves: JSC_WIKI_REPO_CONTENTS first, JSC_WIKI_REPO second, exit 3 when neither is set; it never falls back to JSC_WIKI_REPO_ANALYZE, JSC_WIKI_REPO_PLAN or JSC_WIKI_REPO_REPO. Because directory and content pages sit in different wikis, every directory row links its content page by the absolute URL from gitea.sh wiki-url {content repo} {page}; [[...]] resolves only inside one wiki and would dead-link from the directory.

All wiki reads and writes go through jsc-gitea:wiki. A failed wiki read or write stops this stage: report which page and which operation failed, never carry on against a page you could not read, and never report a page as saved when the write failed. Step 11 still runs after such a stop.

Steps

1. Model gate and stage lock — run jsc-cli/tools/model-tags.sh sync, then jsc-hooks/hooks/sdlc-gate.sh lock analyze. This stage requires the reasoning-max capability tag. Rules: references/model-gate.md. Completion condition: the script exited 0, and you have reported the stage, the required tag, the actual model id it read from the transcript, and the verdict.

2. Find out whether there is anything to analyze, before anything else costs the user a round. Both directory pages come out of the CONTENTS wiki repo (gitea.sh wiki-repo CONTENTS, resolved once and reused). Read PLAN_CONTENTS for plans whose status is the literal 「未分析」 (name and HASH), and read ANALYZE_CONTENTS for existing analyses. The two pages are independent — read them concurrently, and do not wait for the source branch: which branch the analysis reads from depends on the plan, so it is confirmed in step 4, after the target is known. Completion condition: you have listed every 未分析 plan with its name and HASH plus every existing analysis, or reported that both lists are empty and stopped.

3. Let the user choose per jsc-ask:ask rules: extend an existing analysis or analyze a new plan. State the impact scope on every option. Completion condition: the user has picked one option explicitly, and you have named the target — the existing ANALYZE_{HASH} page, or the plan the new analysis covers.

4. Confirm the source branch for that target — the branch whose code counts as the current state, confirmed before any code is read and before the analysis page is written:

   1. Run git fetch --prune origin first — without it, every origin/... reference is stale cache. Then report the working directory's current branch, the remote branches available (git branch -r; never git branch) and whether the working tree is clean.
   2. Ask per jsc-ask:ask rules which branch the analysis reads from; state the impact scope on every option (analysing the wrong branch produces work packages for code that does not exist).
   3. The current state is always the remote branch origin/{source-branch}, never the local one. The working directory's HEAD must point at the same commit as origin/{source-branch}; behind, ahead or diverged all mean you would be analysing code that is not what the remote holds. Report the gap (git rev-list --left-right --count origin/{source-branch}...HEAD) and stop — this stage never switches branches, never stashes, never pulls and never touches the working tree. Rules in references/branch.md.
   4. Record the confirmed branch and the head sha of origin/{source-branch} on the analysis page. Completion condition: the user has confirmed the branch explicitly, and the origin consistency check above has passed; never infer the branch from the current checkout alone.

5. Analyze the plan page's user stories one by one against the current state, questioning until consensus per references/consensus.md (the single authority for both planning and analysis): every answer produces the next question, and consensus needs both no output-changing unknown and the user's explicit confirmation. Never assume a missing detail, and never start the WBS while any item is still open. Current state means:

   1. Every file in the working directory, at the commit origin/{source-branch} points to (verified in step 4).
   2. Reuse an existing method or endpoint unless its logic cannot satisfy the requirement:
      • Check the REPO_{HASH} inventory page first, in the REPO wiki repo. Its {HASH} is hash-id over that repository's own {owner}/{repo} — one inventory page per repository, so a multi-repository analysis holds one REPO_{HASH} per repository and never one shared page. Re-inventory when the feature or endpoint is missing, or when the recorded commit sha differs from the current one.
      • Re-inventory MUST run as a sub agent: analyze the repository's features and endpoints, attach the current commit sha, write back to REPO_{HASH} with templates/repo-page.md, then upsert this repository's row in REPO_CONTENTS with jsc-gitea/tools/wiki-contents.sh upsert REPO 1 {owner}/{repo} {row file} templates/repo-contents.md. The row follows templates/repo-contents.md, and the key is column 1, the repository name, written exactly as the row file writes it. Its 盤點頁 cell holds the absolute URL from gitea.sh wiki-url {REPO repo} REPO_{HASH} — take that URL first and branch on the exit code per "Every cross-repo link comes from wiki-url" below, because the row must never carry an empty link cell.
      • Never hand-edit REPO_CONTENTS, and never touch a row belonging to another repository. Branch on the script's exit code — see "Contents pages are appended, never overwritten" below. REPO_{HASH} is a content page for one repository, so rewriting it whole is correct; the directory page around it is not.
      • For each reuse candidate, confirm the file path and method name first, then analyze whether its logic fits the requirement. Reject a candidate only for a stated reason, and record both the candidate and that reason in the analysis page's 複用決策 field.

   Completion condition: every user story has reached consensus under both conditions of references/consensus.md, and every reuse decision — reused, or rejected with its reason — is recorded in 複用決策.

6. Run a Work Breakdown Structure (WBS): split the user stories into work packages, number them sequentially (WP-01, WP-02, ...) and mark dependencies. Completion condition: every user story on the plan page maps to at least one numbered work package, and every dependency edge is recorded in the WBS table's 相依 column.

7. WP-01 is always the delivery/handover work package — see "Delivery package is WP-01" below. It stands alone, never merged into an implementation package, and every implementation package that consumes its spec depends on it. Completion condition: WP-01 is marked 交付 是 and holds only spec-shaped items, and every implementation package that consumes its spec names WP-01 in its 相依 column — or the no-handover case below is confirmed with the user and its reason is written on the page.

8. Estimate every work package's effort in hours and days with the Critical Path Method (CPM), and mark the critical path. Draw the critical path as a mermaid gantt chart per references/cpm-chart.md — its date/duration rules are mandatory, not a suggestion; skipping them is how the Invalid date rendering failure happens. Completion condition: every work package carries an hours figure and a days figure, the critical path plus its total days are written on the page, and the gantt chart follows references/cpm-chart.md exactly (integer-hour durations, after chaining, no dateFormat X).

9. Write the user story acceptance plan first, then the TDD todos. The acceptance plan goes under the section ## 使用者故事驗收計畫; every work package is then broken down under ## 測試計畫（TDD）, with [ ] for an open item and [x] for a finished one.

   1. Every user story gets acceptance scenarios, and every scenario states its acceptance method as either 真實資料 or 邏輯推論. Scenario count follows the story's complexity: a simple story takes at least 1; a medium story at least 2, covering one main flow plus one boundary or error flow; a complex story at least 3, covering the main flow, the boundary flow and the failure flow.
   2. Every scenario states its input, its expected result, its data source and the work package it belongs to.
   3. Every TDD todo is one whole cycle: one seam, one failing test first, one minimal implementation, one green verification, and a post-green refactor where it is needed. Never split the red test, the minimal implementation and the green verification into separate todos. Seams and anti-patterns: references/tdd.md.
   4. Completion condition: every user story has scenarios under ## 使用者故事驗收計畫; every scenario carries an explicit acceptance method and data source; the scenario count matches the story's complexity; every work package has its own subsection under ## 測試計畫（TDD）; every implementation work package holds at least one test-first [ ] todo; and every todo states its seam, its acceptance scenario, the behaviour the test asserts, the minimal implementation scope and how green is verified. A pure delivery package may use document-verification or sample-data-verification todos instead, and still states the test evidence or the review evidence that proves the spec is usable.

10. Write the analysis page and its catalogue entries in one wiki pass. Apply templates/analyze-page.md to create or update the analysis page in the ANALYZE wiki repo and write it back via jsc-gitea:wiki; the page content is Traditional Chinese, exactly as the template dictates. Both directory rows then go through jsc-gitea/tools/wiki-contents.sh, never a hand-edited page:

    • jsc-gitea/tools/wiki-contents.sh upsert ANALYZE 3 {HASH} {row file} templates/analyze-contents.md — the row follows templates/analyze-contents.md and the key is the HASH column, column 3. Its 分析頁 cell holds the absolute URL from gitea.sh wiki-url {ANALYZE repo} ANALYZE_{HASH}: take that URL after the analysis page is saved and branch on the exit code per "Every cross-repo link comes from wiki-url" below, because the row must never carry an empty link cell.
    • jsc-gitea/tools/wiki-contents.sh upsert PLAN 4 {HASH} {row file} templates/plan-contents.md — rebuild that plan's row from the one the page already holds, change only its status to the literal 「已分析」, and keep every other cell (including the absolute plan-page link) byte-for-byte as it was. The key is the HASH column, column 4.

    Both runs branch on the exit code per "Contents pages are appended, never overwritten" below. Completion condition: the analysis page is saved on the wiki carrying every section the template dictates — the source branch, the head sha and the 未決項 section (「無」 when there is none) included — every wiki-url call this step made returned 0 and its URL is the one in the row, both wiki-contents.sh runs exited 0, and ANALYZE_CONTENTS shows this analysis's row while PLAN_CONTENTS shows the literal 「已分析」.

11. Stage report — the last thing this stage does, including every early stop (the model gate blocked, the working tree did not match origin/{source-branch}, no plan was selectable, a wiki read or write failed). Run tools/stage-report.sh analyze with one --page TYPE:{page} per wiki page this run wrote — --page ANALYZE:ANALYZE_{HASH}, --page CONTENTS:ANALYZE_CONTENTS, --page CONTENTS:PLAN_CONTENTS, and --page REPO:REPO_{HASH} plus --page CONTENTS:REPO_CONTENTS when a re-inventory happened. Every directory page takes the CONTENTS type: the script resolves each page's repo from the TYPE you pass, and a directory page passed under its old type resolves the wrong repo and prints no URL. Add --worklog and --worklog-heading when a work log entry exists. No work log yet: write this stage's log content to a file — with a Bash heredoc or mktemp per Hard limits, never with Write or Edit — and pass --pending-file {file} --log-hash {HASH} so it is held for the next jsc-log:worklog run. Rules and exit codes: references/stage-report.md. Exit 1 is a warning, never a block. Completion condition: the script's output is reported to the user verbatim, and every wiki page this run wrote appears in it.

Contents pages are appended, never overwritten

ANALYZE_CONTENTS, PLAN_CONTENTS and REPO_CONTENTS are shared directories in the CONTENTS wiki repo: every row on them belongs to somebody's plan, analysis or repository, and this run reads none of those rows from anywhere else. So every write to them is an upsert of one row — never a whole-page overwrite, and never a row this run does not own. jsc-gitea/tools/wiki-contents.sh upsert is the one way this stage does it: it resolves the CONTENTS repo, reads the whole page, replaces the row whose key column matches and appends when none matches, then writes the page back.

Branch on its exit code:

Exit	What this step does
0	the row is in place — carry the updated or added word it printed into the stage report
1	the write failed, or the page holds no markdown table — report it as a failed write and go to step 11 as a failure
2	an argument was rejected (unknown type, key column, missing row file) — fix the argument and run it again; nothing was written
3	no CONTENTS wiki repo is configured — stop and report JSC_WIKI_REPO_CONTENTS and JSC_WIKI_REPO as the two variables to set. The content page this run wrote is saved and stays saved
4	the directory page is absent and no template was passed. Every call in this stage already passes that page's template, so this code does not come out of this skill's call — a wrong template path is rejected as 2, not as 4. Seeing it anyway means the template file is not where the plugin puts it: confirm the plugin installation is complete and run it again. Never answer it by dropping the template argument
7	the key is invalid or lacks permission — stop and report the key problem; the script wrote nothing, which is what keeps every other row alive
8	any other API failure — stop and report that status, and do not retry the same call unchanged

Why 7 and 8 abort: both mean the old content is unknown, not that the page is missing. Reading either as "not there yet" would write a fresh template over a live directory, and every other row is gone — the write carries no merge and no backup. Content pages (ANALYZE_{HASH}, PLAN_{HASH}, REPO_{HASH}) are the opposite case: each belongs to one subject and lives in its own type's repo, so rewriting one whole is correct. The distinction is the page, not the write.

Completion condition: every directory-page write this stage made names the wiki-contents.sh exit code it branched on, and no directory page was created on any code other than 4.

Every cross-repo link comes from wiki-url

Both directory rows this stage writes — REPO_CONTENTS in step 5.2 and ANALYZE_CONTENTS in step 10 — link a content page that lives in another wiki repo, so the cell holds the absolute URL gitea.sh wiki-url {content repo} {page} printed and nothing else. Run it after that content page is saved, and branch on its exit code; this is the same branching jsc-log:worklog runs over the same call.

Exit	What this step does
0	use the URL it printed, verbatim
4	the page is not on the wiki, so the write that was supposed to create it has not landed — go back to that write (step 5.2 for REPO_{HASH}, step 10 for ANALYZE_{HASH}) and come here again only once the page is saved
5	the page exists but carries no html_url — stop and report it, and never assemble the URL by hand; a hand-built path is not the one Gitea serves
7	the key is invalid or lacks permission (HTTP 401/403) — stop and report the key problem. Never read this as exit 4: the content page is alive, and treating it as absent records a live page as one that was never written
8	any other API failure — stop and report that status, and do not retry the same call unchanged

Never let an empty string stand in for the URL. A row whose link cell is empty is a directory entry that points nowhere, the reader has no way to reach the page it names, and the next run replaces that row as if it were correct.

Completion condition: every row this stage upserted carries a URL that came out of a wiki-url run that exited 0, and every non-zero code was branched on as this table says.

Delivery package is WP-01

A work package is a delivery/handover package when someone else — another person, another CLI, another team — has to act on its output. Interfaces, schemas, spec documents, acceptance criteria and sample payloads are delivery output; endpoint bodies and UI wiring are not.

• WP-01 is the delivery/handover package, always first, always standalone. Pull every spec-shaped item out of the implementation packages and put it here. Never merge a spec into the package that implements it — merging removes the ability to hand the spec over early, which is the whole point.
• Implementation packages depend on WP-01 when they consume its spec, and they are the backup queue: still numbered, still estimated, still on the page, just ranked after it.
• Mark every work package as 交付 是 / 否 in the WBS table, and record WP-01's intended content type in the 交付型別 column when the user has already decided it (options in references/deliver-formats.md; the type is confirmed for real when implement starts that package).
• Dependencies still win among the rest: never place a package before one it depends on. Within the same dependency level, delivery-shaped packages come first.
• When nothing is genuinely deliverable (say, an internal refactor with no interface change), do not invent an empty WP-01: confirm with the user per jsc-ask:ask that this analysis has no handover output, then note the reason on the page and number the implementation packages from WP-01.

Sample data

Every sample value on the analysis page — request and response payloads, field values, config snippets, test fixtures — follows references/deliver-formats.md, which owns the source order, the labelling and the API-document layout. Record each value's origin in the WBS table's 資料來源 column. Completion condition: every sample value on the page carries a 資料來源 label of either 「真實：{source}」 or 「推論：無來源」, and no sample value contains personal data.

Hard limits

• Never output a code snippet (file paths and method names are allowed).
• Never modify any file in the working directory. This limit is enforced in code where the CLI allows it: jsc-hooks/hooks/write-guard.sh in stage mode runs as a PreToolUse hook and blocks Write, Edit and MultiEdit while this stage's lock exists — the same lock state jsc-hooks/hooks/sdlc-gate.sh lock analyze writes in step 1. Only claude has PreToolUse. Codex, copilot, antigravity and kiro never reach that hook, so on those four CLIs this line is the only thing holding the limit.
• Every row file this stage builds — REPO_CONTENTS in step 5.2, ANALYZE_CONTENTS and PLAN_CONTENTS in step 10 — and the pending-file of step 11 are produced with a Bash heredoc or mktemp, in a temporary directory, never with the Write or Edit tool. That gate blocks on the stage lock alone and never looks at the path, so a Write of any of those four files is blocked by this stage's own lock and the stage cannot finish: no directory row gets written and this stage's log content is never parked. All four are scratch input to a script, they live outside the working directory, and writing them this way keeps the limit above intact — nothing in the working directory is touched.
• Never switch, create or clean branches in this stage; ask the user to do it.