diff --git a/.claude-plugin/plugin.json b/.claude-plugin/plugin.json
index 57ff1c7..19ede4e 100644
--- a/.claude-plugin/plugin.json
+++ b/.claude-plugin/plugin.json
@@ -1,6 +1,6 @@
 {
   "name": "jsc-hooks",
-  "version": "0.0.11",
+  "version": "0.1.5",
   "description": "跨 CLI hooks：STE100 語言強制、工時計時、技能用量記錄、SDLC 模型鎖、版本前置檢查",
   "skills": "./skills",
   "author": {
diff --git a/.codex-plugin/plugin.json b/.codex-plugin/plugin.json
index fe46539..a50558b 100644
--- a/.codex-plugin/plugin.json
+++ b/.codex-plugin/plugin.json
@@ -1,6 +1,6 @@
 {
   "name": "jsc-hooks",
-  "version": "0.0.11",
+  "version": "0.1.5",
   "description": "跨 CLI hooks：STE100 語言強制、工時計時、技能用量記錄、SDLC 模型鎖、版本前置檢查",
   "skills": "./skills"
 }
diff --git a/README.md b/README.md
index 949d4d9..0bb18bd 100644
--- a/README.md
+++ b/README.md
@@ -46,7 +46,7 @@ Claude 由 `hooks/hooks.json` 自動接線五支 hook；其他 CLI 用 `hooks-in
 | `tools/jsc-wrap.sh` | 沒有完整 hook 系統的 CLI 的包裝啟動器：匯出 `JSC_CLI`、`JSC_SESSION_ID`，前後接 `session-timer.sh`，結束時自動跑 `scan-logs.sh` 回填。`JSC_CLI` 存 CLI 代號，實際執行的是對應的執行檔（antigravity 是 agy、kiro 是 kiro-cli） |
 | `tools/scan-logs.sh` | 離線回填：解析 copilot、antigravity、codex 的原生日誌，把技能用量與階段界線補進 `$JSC_HOME`，重掃不重複 |
 | `tools/report-error.sh` | 失敗回報流程：把一筆 hook 或工具異常寫成 wiki 的 `ERROR_{HASH}`，並在 `ERROR_CONTENTS` 附上一列索引。wiki 位置由 `jsc-gitea` 的 `gitea.sh wiki-repo ERROR` 解析，解析不出來就安靜降級。由操作者手動執行，或由 `hooks-install` 在 `wire-cli.sh` 回報 `status=failed` 時執行；**不接在失敗的 hook 上自動觸發**（hook 一律安靜 exit 0，自我回報會疊出迴圈） |
-| `tools/wire-cli.sh` | 單一 CLI 的接線流程：`{cli}` 對應的設定編輯、包裝別名安裝、hook 檔建立，皆以 `<!-- jsc-hooks -->`（或 `# jsc-hooks`）標記整段取代，重跑不重複。寫完每個檔案會重讀驗證位置正確才回報成功（codex 的 `notify` 必須是根層鍵、kiro 的 JSON 必須成對且 `on`、`run` 在最上層）；以 `status=wired\|degraded\|skipped\|failed` 回報結果 |
+| `tools/wire-cli.sh` | 單一 CLI 的接線流程：`{cli}` 對應的設定編輯、包裝別名安裝、hook 檔建立，皆以 `<!-- jsc-hooks -->`（或 `# jsc-hooks`）標記整段重寫，重跑等同先移除再重裝。寫完每個檔案會重讀驗證位置正確才回報成功（codex 的 `notify` 必須是根層鍵、kiro 的 JSON 必須成對且 `on`、`run` 在最上層）；以 `status=wired\|degraded\|skipped\|failed` 回報結果 |
 
 ## 失敗回報範本
 
@@ -66,7 +66,11 @@ Claude 由 `hooks/hooks.json` 自動接線五支 hook；其他 CLI 用 `hooks-in
 
 ### `hooks-install`
 
-把五支 hook 接線到所有已安裝的 CLI：偵測 CLI 後，逐一呼叫 `tools/wire-cli.sh {cli}` 完成接線（claude 由 `hooks.json` 自動接線，無需寫入）。codex、copilot、antigravity 由該腳本裝上 `tools/jsc-wrap.sh` 包裝別名補上計時與用量回填（結束時自動跑 `tools/scan-logs.sh`），語言規則仍追加到各自的規則檔（以 `<!-- jsc-hooks -->` 標記整段取代，不重複追加）。codex、copilot、antigravity、kiro 的 SDLC 模型鎖降級為技能步驟檢查，鎖檔仍由 SDLC 技能直接呼叫 `sdlc-gate.sh lock` 寫入；這四個 CLI 沒有 pre-tool hook，版本前置檢查接不上，腳本會在 `reason` 裡講明，只有 claude 回報 `wired`。腳本第一行以 `status=wired|degraded|skipped|failed reason=...` 回報結果；`failed` 由技能改呼叫 `tools/report-error.sh` 寫一頁 `ERROR_{HASH}`。
+把五支 hook 接線到所有已安裝的 CLI：偵測 CLI 後，逐一呼叫 `tools/wire-cli.sh {cli}` 完成接線（claude 由 `hooks.json` 自動接線，無需寫入）。codex、copilot、antigravity 由該腳本裝上 `tools/jsc-wrap.sh` 包裝別名補上計時與用量回填（結束時自動跑 `tools/scan-logs.sh`），語言規則仍重寫到各自的規則檔（以 `<!-- jsc-hooks -->` 標記整段取代，等同先移除再重裝，不重複追加）。codex、copilot、antigravity、kiro 的 SDLC 模型鎖降級為技能步驟檢查，鎖檔仍由 SDLC 技能直接呼叫 `sdlc-gate.sh lock` 寫入；這四個 CLI 沒有 pre-tool hook，版本前置檢查接不上，腳本會在 `reason` 裡講明，只有 claude 回報 `wired`。腳本第一行以 `status=wired|degraded|skipped|failed reason=...` 回報結果；`failed` 先寫 `ERROR_{HASH}`，再手動或自動交給 `repair` 技能接手。
+
+### `repair`
+
+接手 `hooks-install` 或 `report-error.sh` 留下的失敗：讀 `ERROR_{HASH}` 與相關檔案後，把診斷拆給安裝中的其他 AI agent CLI 當 sub agent，彙整建議修正、實作 hooks repo 的修補、同步 manifest，最後以 `develop` 為基底開 PR。只有在真的沒有可用 CLI 時，才退回主 agent 自己判讀。
 
 <!-- JSC-SKILLS:END -->
 
diff --git a/plugin.json b/plugin.json
index 0ddeef3..dfc00f5 100644
--- a/plugin.json
+++ b/plugin.json
@@ -1,6 +1,6 @@
 {
   "name": "jsc-hooks",
-  "version": "0.0.11",
+  "version": "0.1.5",
   "description": "跨 CLI hooks：STE100 語言強制、工時計時、技能用量記錄、SDLC 模型鎖、版本前置檢查",
   "skills": "./skills/"
 }
diff --git a/skills/hooks-install/SKILL.md b/skills/hooks-install/SKILL.md
index a2c29b5..0d80b40 100644
--- a/skills/hooks-install/SKILL.md
+++ b/skills/hooks-install/SKILL.md
@@ -9,14 +9,15 @@ Goal: make the five hooks (`ste100-guard.sh`, `session-timer.sh`, `skill-usage.s
 Only claude has both PreToolUse and UserPromptSubmit, so only claude reports `wired`. On codex, copilot, antigravity and kiro the version guard cannot be wired at all and the SDLC gate degrades to the skill-step check, so all four report `degraded` — report that gap as the script words it instead of implying every CLI is covered.
 The lock file still works on those four because the SDLC skills call `sdlc-gate.sh lock {stage}` directly — that call is where the capability-tag comparison happens, so the gate keeps its force even where the prompt hook cannot be wired.
 The gate needs `$JSC_HOME/model-tags.tsv`; when it is missing, report that `jsc-cli:models` (or `jsc-cli/tools/model-tags.sh sync`) must run once, because `sdlc-gate.sh lock` refuses to lock without it.
+When `tools/wire-cli.sh` reports `failed`, hand the failure to `jsc-hooks:repair` right away. Do not leave a failed wiring as a dead end.
 The detailed flow **MUST run as a sub agent**; the main agent only reports the summary.
 
 ## Steps
 
 1. Run `jsc-cli/tools/detect-clis.sh`. Done when you hold the list of installed CLIs; when the list is empty, report that and stop.
 2. For each installed CLI, run `tools/wire-cli.sh {cli}`. The script owns both the wiring and its verification: it writes the config, alias or hook file inside a `<!-- jsc-hooks -->` (or `# jsc-hooks`) marker block, re-reads every file it wrote, and confirms the block is present and correctly placed before it prints a success status. Trust its first line, `status=wired|degraded|skipped|failed reason=...`. Exit 2 means a bad CLI name, not a wiring outcome — fix the name and rerun. Done when every installed CLI has printed exactly one `status=` line and none exited 2.
-3. For each CLI whose status is `failed`, record it: run `tools/report-error.sh --hook wire-cli.sh --exit 4 --summary "{the reason field}" --cli {cli}` and feed the script's `[jsc]` output in on stdin. Done when each `failed` CLI has either an `ERROR_{HASH}` page name on stdout, or an empty exit 0 meaning `JSC_WIKI_REPO_ERROR` and `JSC_WIKI_REPO` are both unset — in that second case carry the reason into step 4 instead. Skip this step when no CLI reported `failed`.
-4. Report the exact `status=` line `tools/wire-cli.sh` printed for each CLI, plus the `ERROR_{HASH}` page for any `failed` one. Done when every detected CLI has exactly one reported status: wired, degraded, skipped or failed, each with its reason.
+3. For each CLI whose status is `failed`, record it: run `tools/report-error.sh --hook wire-cli.sh --exit 4 --summary "{the reason field}" --cli {cli}` and feed the script's `[jsc]` output in on stdin. Then hand the failure to `jsc-hooks:repair`, which must run as a sub agent and must finish by opening a PR against `develop`. Done when each `failed` CLI has either an `ERROR_{HASH}` page name on stdout, or an empty exit 0 meaning `JSC_WIKI_REPO_ERROR` and `JSC_WIKI_REPO` are both unset — in that second case carry the reason into step 4 instead. Skip this step when no CLI reported `failed`.
+4. Report the exact `status=` line `tools/wire-cli.sh` printed for each CLI, plus the `ERROR_{HASH}` page and repair PR URL for any `failed` one. Done when every detected CLI has exactly one reported status: wired, degraded, skipped or failed, each with its reason, and every failed wiring has a repair PR against `develop`.
 
 ## Notes
 
diff --git a/skills/repair/SKILL.md b/skills/repair/SKILL.md
new file mode 100644
index 0000000..18e88c0
--- /dev/null
+++ b/skills/repair/SKILL.md
@@ -0,0 +1,16 @@
+---
+name: repair
+description: Repair failed hook wiring by delegating diagnosis to installed AI agent CLIs as subagents, patching the hooks repo, syncing manifests, and opening a PR against develop. Use when hooks-install or report-error.sh reports a failed hook, or when a hook keeps failing after rewiring; not for routine wiring or unrelated work.
+---
+
+# repair — repair a failed hook
+
+Single source of guidelines: [`../../references/guidelines.md`](../../references/guidelines.md).
+
+## Flow
+
+1. Read the failure context from `ERROR_{HASH}` through `jsc-gitea:wiki` or from the failed `status=` line, then confirm the target repo is `hooks` and the PR base branch is `develop`. Completion condition: the failure context and target branch are explicit.
+2. Detect installed AI CLIs with `../cli/tools/detect-clis.sh`, then delegate diagnosis to one subagent per available CLI. Each subagent must receive the failure context and the `/jsc-shared:spec-output` rules, must stay read-only, and must return one structured repair proposal: root cause, changed files, and verification command. Completion condition: every available CLI has one returned proposal, or there are no CLIs and the main agent has noted that it must diagnose alone.
+3. Pick the smallest repair that makes the wiring pass, then apply it in the `hooks` repo. If the fix touches wiring behavior, update `hooks/tools/wire-cli.sh`, `hooks/skills/hooks-install/SKILL.md`, and `hooks/README.md` together. Run the relevant verification command before moving on. Completion condition: the fix is on disk and the verification command passes.
+4. Run `../meta/tools/sync-skill-manifest.sh .`. Completion condition: the README skill list and all three manifests show the same new version.
+5. Commit, push, and open a PR with `jsc-git:pr develop`. Completion condition: a PR URL comes back and the repair is ready for review.
diff --git a/tools/wire-cli.sh b/tools/wire-cli.sh
index f78e38f..764db10 100755
--- a/tools/wire-cli.sh
+++ b/tools/wire-cli.sh
@@ -18,6 +18,7 @@
 #   codex、copilot、antigravity、kiro 只有別名或規則檔，接不上 PreToolUse 與
 #                                   UserPromptSubmit，版本前置檢查與 SDLC 模型鎖
 #                                   都沒接上，一律回報 degraded 並在 reason 講明
+#   所有 jsc 標記段落都採整段重寫，重跑等同先移除舊內容再重裝
 #
 # 寫入後自我驗證，通過才回報成功：每個寫過的檔案重新讀一次，確認標記段落存在且落在
 # 正確位置（codex 的 notify 必須是根層鍵，不能被歸進前一張表；kiro 的 JSON 必須成對
@@ -176,7 +177,7 @@ skip() { # $1=reason
 fail() { # $1=reason
   printf 'status=failed reason=%s\n' "$1"
   echo "[jsc] 接線沒生效：$1" >&2
-  echo "[jsc] 請以 tools/report-error.sh 回報這次失敗，再修好原因重跑本腳本。" >&2
+  echo "[jsc] 請先以 tools/report-error.sh 回報這次失敗，再交給 /jsc-hooks:repair 自動修正並開 develop PR。" >&2
   exit 4
 }