feat(狀態回報): 兩支技能的收尾寫一筆 skill-end
hook 在原理上看不到技能的成敗：它接在技能工具呼叫上，而實際工作發生在 之後的模型輪次。start 由技能用量 hook 順手發，end 只能由技能自己寫。 有 start 沒有配對的 end，就是那一輪中止了。
This commit is contained in:
@@ -7,17 +7,17 @@
|
||||
| 項目 | 內容 |
|
||||
| --- | --- |
|
||||
| 觸發時機 | 裝好或更新完 jsc 技能組之後，要把九支 hook 接線到每一支已安裝的 CLI 時用；`jsc-cli:deploy` 收尾會把偵測到的 CLI 清單交給它。不用於撰寫新的 hook，也不用於單獨修一支壞掉的 hook，那是 `jsc-hooks:repair` 的事 |
|
||||
| 關鍵步驟 | 取得 CLI 清單（呼叫端交來的優先，沒有才自己跑 `detect-clis.sh`）、第一支 CLI 單獨跑完整條管線（它負責更新共用的 `$JSC_HOME/current/jsc-hooks` 連結）、其餘 CLI 一支一個 sub agent 並行、每支 CLI 依序走 purge、接線、status、smoke、scan 五道關卡、讀每道關卡自己印的第一行判定、任一關卡出錯就寫 `ERROR_{HASH}` 並轉給 `jsc-hooks:repair`（異常頁與索引目錄頁分屬兩個存取庫，各自解析；只解不出目錄頁的存取庫時異常頁照寫、索引跳過，回報要講明那一頁沒被索引）、目錄頁那一列指向異常頁的連結一律寫成 `[{文字}]({連結})`，網址取 `gitea.sh wiki-url`，寫進去之前先過 `jsc-gitea/tools/link-check.sh`，結束碼 0 才寫連結、驗不過那一格只留純文字頁名而那一列與異常頁照寫（`report-error.sh` 內部做完，結束碼不變）、逐 CLI 回報五道關卡的結果 |
|
||||
| 關鍵步驟 | 取得 CLI 清單（呼叫端交來的優先，沒有才自己跑 `detect-clis.sh`）、第一支 CLI 單獨跑完整條管線（它負責更新共用的 `$JSC_HOME/current/jsc-hooks` 連結）、其餘 CLI 一支一個 sub agent 並行、每支 CLI 依序走 purge、接線、status、smoke、scan 五道關卡、讀每道關卡自己印的第一行判定、任一關卡出錯就寫 `ERROR_{HASH}` 並轉給 `jsc-hooks:repair`（異常頁與索引目錄頁分屬兩個存取庫，各自解析；只解不出目錄頁的存取庫時異常頁照寫、索引跳過，回報要講明那一頁沒被索引）、目錄頁那一列指向異常頁的連結一律寫成 `[{文字}]({連結})`，網址取 `gitea.sh wiki-url`，寫進去之前先過 `jsc-gitea/tools/link-check.sh`，結束碼 0 才寫連結、驗不過那一格只留純文字頁名而那一列與異常頁照寫（`report-error.sh` 內部做完，結束碼不變）、逐 CLI 回報五道關卡的結果、最後由主代理呼叫一次 `tools/report-status.sh skill-end jsc-hooks:hooks-install {status} {結束碼} {detail}` 記下整輪怎麼結束。腳本在同一個存取庫，用 `tools/` 相對路徑；這一筆只由主代理寫一次，寫在並行的各 CLI sub agent 裡會變成五筆互相矛盾的結局。腳本不在就安靜跳過，回報失敗不得變成接線失敗 |
|
||||
| 外部呼叫 | `tools/wire-cli.sh purge`、`tools/wire-cli.sh {cli}`、`tools/wire-cli.sh status`、`tools/wire-cli.sh smoke`、`tools/scan-hook-errors.sh`、`tools/report-error.sh`、`jsc-cli/tools/detect-clis.sh`、`jsc-hooks:repair` 技能、`jsc-gitea:wiki`（寫 `ERROR_{HASH}` 時經 `report-error.sh`）、`jsc-gitea/tools/gitea.sh wiki-url` 與 `jsc-gitea/tools/link-check.sh`（同樣經 `report-error.sh`，取目錄頁那一列的網址並驗它連得到）；接線腳本內部另呼叫 `hooks/skill-name.sh` 與 `hooks/deny.sh` 做冒煙斷言 |
|
||||
| 完成條件 | 每一支偵測到的 CLI 都有五道關卡各一行判定，沒有任何一道回結束碼 2，smoke 的 `lines` 條數與它自己的斷言相符，claude、codex、copilot、antigravity 回 `wired` 而 kiro 回 `degraded`（CLI 擋不下技能叫用），四支非 claude 的執行期錯誤掃描一律據實回 `unavailable`，各 CLI 的形狀與觸發驗證等級分開寫進回報（codex、antigravity、kiro 形狀實證，copilot 形狀未證；kiro 觸發部分實證，其餘未驗證），每一筆錯誤都帶一個 `ERROR_{HASH}` 結果與一條對 `develop` 的修正 PR 連結，而且目錄頁那一列的連結驗不過時，回報要講明那一列只有純文字頁名、沒有連結 |
|
||||
| 可驗證跡象 | 各 CLI 的設定檔多出 jsc 段落：codex 的 `config.toml` 標記段落、`hooks/codex-hooks.json`（從 `hooks/hooks.json` 推導，matcher `Skill` 換成 `Bash`）與 `.codex-plugin/plugin.json` 指過去的 `hooks` 路徑字串、copilot 的 `~/.copilot/settings.json` 頂層 `hooks` 鍵（matcher `skill`，合併不覆寫，`enabledPlugins` 與第三方條目原樣保留）與 `$COPILOT_HOME` 底下的指引檔、antigravity 的 `~/.gemini/config/hooks.json` 的 `jsc` 段落（`PreToolUse` 為 Grouped、matcher `^view_file$`，`PreInvocation` 維持 Flat）、kiro 的 `~/.kiro/agents/jsc.json`（`hooks` 為 `agentSpawn`、`userPromptSubmit`、`stop` 三個合法事件加 `timeout_ms`、兩層 `skill://` glob 的 `resources`、明列的 `tools`，並通過 `kiro-cli agent validate`）與 `~/.kiro/settings/cli.json` 的 `chat.defaultAgent=jsc`；四支非 claude 的接線命令都以 `JSC_CLI={代號}` 前綴自帶 CLI 代號，缺了它兩道閘門解不出技能名、一律安靜放行，所以 `status` 把它列成單獨一項；另有 `$JSC_HOME/current/jsc-hooks` 符號連結建立或更新、`$JSC_HOME/backup/hooks/{cli}/{時間戳}/` 留下 purge 前的備份、出錯時 wiki 多一頁 `ERROR_{HASH}`（落在 `JSC_WIKI_REPO_ERROR` 解出的存取庫）並在索引目錄頁補一列（落在 `JSC_WIKI_REPO_CONTENTS` 解出的另一個存取庫，那一列的第 2 格寫成 `[{頁名}]({絕對網址})`，網址取自 `gitea.sh wiki-url` 且已經過 `link-check.sh` 驗到結束碼 0；驗不過那一格只有純文字頁名，`report-error.sh` 在 stderr 留一行 `[jsc]` 講明是哪一種原因）、修正路徑留下一條對 `develop` 的 PR 。接線完成後 `$JSC_HOME/usage/events.jsonl` 會逐行長出 `{kind:hook}` 事件，每支 hook 每次執行一筆，欄位含 `status` 與實際結束碼；跑過技能之後另有 `{kind:skill,phase:start}`。事件寫不進去不影響任何 hook 的結束碼 |
|
||||
| 完成條件 | 每一支偵測到的 CLI 都有五道關卡各一行判定，沒有任何一道回結束碼 2，smoke 的 `lines` 條數與它自己的斷言相符，claude、codex、copilot、antigravity 回 `wired` 而 kiro 回 `degraded`（CLI 擋不下技能叫用），四支非 claude 的執行期錯誤掃描一律據實回 `unavailable`，各 CLI 的形狀與觸發驗證等級分開寫進回報（codex、antigravity、kiro 形狀實證，copilot 形狀未證；kiro 觸發部分實證，其餘未驗證），每一筆錯誤都帶一個 `ERROR_{HASH}` 結果與一條對 `develop` 的修正 PR 連結，而且目錄頁那一列的連結驗不過時，回報要講明那一列只有純文字頁名、沒有連結。以上收完之後還要走完最後一步：呼叫 `report-status.sh skill-end`，狀態五選一——每一支偵測到的 CLI 五道關卡全過而且一律回 `wired` 是 `ok`，實務上等於那台機器沒有 kiro；跑完整輪但有一部分沒到 `wired` 是 `degraded`，涵蓋 kiro 只能降級接線，以及某支 CLI 接線失敗、已經轉交 `jsc-hooks:repair` 而且拿到一條對 `develop` 的 PR，還有被跳過的 CLI；關卡失敗而沒人接手是 `failed`，也就是修正技能起不來或回不出 PR，壞掉的 hook 還掛在那裡；`JSC_READONLY=1` 讓 `wire-cli.sh` 回 exit 6、一支 CLI 都沒動是 `blocked`；偵測不到任何 CLI 而主動停止是 `aborted`。腳本不在磁碟上就跳過，這一步照樣算走完 |
|
||||
| 可驗證跡象 | 各 CLI 的設定檔多出 jsc 段落：codex 的 `config.toml` 標記段落、`hooks/codex-hooks.json`（從 `hooks/hooks.json` 推導，matcher `Skill` 換成 `Bash`）與 `.codex-plugin/plugin.json` 指過去的 `hooks` 路徑字串、copilot 的 `~/.copilot/settings.json` 頂層 `hooks` 鍵（matcher `skill`，合併不覆寫，`enabledPlugins` 與第三方條目原樣保留）與 `$COPILOT_HOME` 底下的指引檔、antigravity 的 `~/.gemini/config/hooks.json` 的 `jsc` 段落（`PreToolUse` 為 Grouped、matcher `^view_file$`，`PreInvocation` 維持 Flat）、kiro 的 `~/.kiro/agents/jsc.json`（`hooks` 為 `agentSpawn`、`userPromptSubmit`、`stop` 三個合法事件加 `timeout_ms`、兩層 `skill://` glob 的 `resources`、明列的 `tools`，並通過 `kiro-cli agent validate`）與 `~/.kiro/settings/cli.json` 的 `chat.defaultAgent=jsc`；四支非 claude 的接線命令都以 `JSC_CLI={代號}` 前綴自帶 CLI 代號，缺了它兩道閘門解不出技能名、一律安靜放行，所以 `status` 把它列成單獨一項；另有 `$JSC_HOME/current/jsc-hooks` 符號連結建立或更新、`$JSC_HOME/backup/hooks/{cli}/{時間戳}/` 留下 purge 前的備份、出錯時 wiki 多一頁 `ERROR_{HASH}`（落在 `JSC_WIKI_REPO_ERROR` 解出的存取庫）並在索引目錄頁補一列（落在 `JSC_WIKI_REPO_CONTENTS` 解出的另一個存取庫，那一列的第 2 格寫成 `[{頁名}]({絕對網址})`，網址取自 `gitea.sh wiki-url` 且已經過 `link-check.sh` 驗到結束碼 0；驗不過那一格只有純文字頁名，`report-error.sh` 在 stderr 留一行 `[jsc]` 講明是哪一種原因）、修正路徑留下一條對 `develop` 的 PR 。接線完成後 `$JSC_HOME/usage/events.jsonl` 會逐行長出 `{kind:hook}` 事件，每支 hook 每次執行一筆，欄位含 `status` 與實際結束碼；跑過技能之後另有 `{kind:skill,phase:start}`。這支技能自己收尾時，同一個 `$JSC_HOME/usage/events.jsonl` 尾端會多一筆 `{kind:skill,phase:end}`，`name` 是 `jsc-hooks:hooks-install`，整輪只有一筆，`status` 與那次結局相符，`exit` 是決定結局的那道關卡的結束碼；`report-status.sh` 不在那台機器上就沒有這一筆，接線結果一字不變。事件寫不進去不影響任何 hook 的結束碼，也不影響本技能的結局 |
|
||||
|
||||
## repair
|
||||
|
||||
| 項目 | 內容 |
|
||||
| --- | --- |
|
||||
| 觸發時機 | `hooks-install` 或 `report-error.sh` 回報某一支 hook 失敗時用，或是重新接線之後那支 hook 還是一直失敗時用。不用於例行接線，也不用於與 hook 無關的修改 |
|
||||
| 關鍵步驟 | 從 `ERROR_{HASH}` 讀失敗情境（沒有頁就讀失敗的 `status=` 那一行，讀不到就停下來問）、跑 `detect-clis.sh`、每一支偵測到的 CLI 各開一個唯讀 sub agent 診斷並交回根因、要改的檔案與驗證指令、挑最小的修正改進 hooks 存取庫（技能名解析改 `hooks/skill-name.sh`、阻擋形態改 `hooks/deny.sh`，兩支是唯一真實來源，不在閘門裡各補一份）、跑 `wire-cli.sh smoke {cli}` 驗到 exit 0、跑 `sync-skill-manifest.sh .` 同步版本、以 `jsc-git:pr` 對 `develop` 開 PR |
|
||||
| 關鍵步驟 | 從 `ERROR_{HASH}` 讀失敗情境（沒有頁就讀失敗的 `status=` 那一行，讀不到就停下來問）、跑 `detect-clis.sh`、每一支偵測到的 CLI 各開一個唯讀 sub agent 診斷並交回根因、要改的檔案與驗證指令、挑最小的修正改進 hooks 存取庫（技能名解析改 `hooks/skill-name.sh`、阻擋形態改 `hooks/deny.sh`，兩支是唯一真實來源，不在閘門裡各補一份）、跑 `wire-cli.sh smoke {cli}` 驗到 exit 0、跑 `sync-skill-manifest.sh .` 同步版本、以 `jsc-git:pr` 對 `develop` 開 PR、收尾呼叫 `tools/report-status.sh skill-end jsc-hooks:repair {status} {結束碼} {detail}` 記下這次修正怎麼結束（腳本在同一個存取庫，用 `tools/` 相對路徑，比照 `tools/wire-cli.sh`；檔案不在就安靜跳過，回報失敗不得變成修正失敗） |
|
||||
| 外部呼叫 | `jsc-gitea:wiki`、`jsc-cli/tools/detect-clis.sh`、`tools/wire-cli.sh smoke`、`jsc-meta/tools/sync-skill-manifest.sh`、`jsc-git:pr`；診斷階段另以 sub agent 叫用各支已安裝的 AI CLI |
|
||||
| 完成條件 | 修正已經落在磁碟上、`wire-cli.sh smoke` 對受影響的 CLI 回 exit 0、`sync-skill-manifest.sh` 回 exit 0 而且三份 manifest 版本一致，最後拿到一條對 `develop` 的 PR 連結；開不出 PR 時要講明修正已套用但尚未合併、帶上分支名與失敗原因 |
|
||||
| 可驗證跡象 | hooks 存取庫多一個修正提交與一條推上去的分支、`develop` 上多一條 PR、三份 manifest 與 README 技能清單版本一致、`wire-cli.sh smoke` 由失敗轉為 exit 0 |
|
||||
| 完成條件 | 修正已經落在磁碟上、`wire-cli.sh smoke` 對受影響的 CLI 回 exit 0、`sync-skill-manifest.sh` 回 exit 0 而且三份 manifest 版本一致，最後拿到一條對 `develop` 的 PR 連結；開不出 PR 時要講明修正已套用但尚未合併、帶上分支名與失敗原因。每一條路線都要走完最後一步：呼叫 `report-status.sh skill-end`，狀態五選一——修正落地、smoke 回 exit 0、三份 manifest 版本一致而且拿到 PR 連結是 `ok`；smoke 過了但東西沒送出去是 `degraded`，也就是開不出 PR 只剩分支，或 manifest 沒對齊；修不好是 `failed`，也就是診斷繞回去以後 smoke 還是回 exit 4，或同步版本踩到環境錯誤，壞掉的接線還是壞的；沒有可修的項目是 `aborted`，也就是讀不到任何失敗情境。本技能豁免版本閘門與部署後重啟閘門，沒有別的閘門擋得住它，所以不會用 `blocked`。腳本不在磁碟上就跳過，這一步照樣算走完 |
|
||||
| 可驗證跡象 | hooks 存取庫多一個修正提交與一條推上去的分支、`develop` 上多一條 PR、三份 manifest 與 README 技能清單版本一致、`wire-cli.sh smoke` 由失敗轉為 exit 0；不論走哪一條路線，`$JSC_HOME/usage/events.jsonl` 尾端都會多一筆 `{kind:skill,phase:end}` 事件，`name` 是 `jsc-hooks:repair`，`status` 與那次結局相符，`exit` 是決定結局的那支工具的結束碼；`report-status.sh` 不在那台機器上就沒有這一筆，修正結果一字不變 |
|
||||
|
||||
@@ -77,6 +77,10 @@ The detailed flow **MUST run as a sub agent**; the main agent only reports the s
|
||||
Done when every detected CLI has exactly one verdict line per stage, no stage exited 2, the smoke stage's `lines` count matches its own assertion, the four non-claude CLIs are reported as `unavailable` rather than clean on the scan stage, and antigravity and kiro carry the note that their hook firing is unverified.
|
||||
3. For each error — a failed purge, a failed wiring, an `unwired` status, a failed smoke, or a scanned error with `jsc=true` — run `tools/report-error.sh --hook {script name} --exit {code} --summary "{reason}" --cli {cli}` with the script's `[jsc]` output on stdin, then hand the failure to `jsc-hooks:repair`, which **MUST run as a sub agent** and must finish by opening a PR against `develop`. Aborting the remaining installs here is allowed as long as the repair starts. The error page and the error directory page live in two different wiki repos, resolved separately: the page through `wiki-repo ERROR`, the directory through `wiki-repo CONTENTS`. Exit 0 with an `ERROR_{HASH}` page name and URL on stdout means the page was written; the same exit 0 with a `[jsc]` line on stderr still means the page landed, and that line says what is missing — the directory repo would not resolve, so nothing indexes the page; the page URL could not be read back, so the page name comes out on its own; or the URL failed the reachability check, so the directory row carries the page name as plain text with no link — carry that note into step 4. Every link on that row is written as `[{text}]({url})` with the URL from `gitea.sh wiki-url`, and the script checks it with `jsc-gitea/tools/link-check.sh` before writing: exit 0 writes the link, anything else keeps the row and drops the link, and none of it changes the exit code — this is the failure-reporting path, so a failed report must never become a second failure. Exit 0 with no output at all means the run ended on one of the quiet-degradation reasons listed in the script's own header — no `gitea.sh` on the path, the error page's wiki repo unresolved, the hash not computed, or a temp file not created — so no page was written at all and that reason goes into step 4 instead; exit 2 means the call itself was malformed — `--hook` or `--summary` is missing — so fix the arguments and rerun the same call; exit 4 means the wiki record did not land, so report the failure text and still start the repair — a page that could not be written is no reason to leave a broken hook wired. Exit 4 covers two cases, and the report has to say which: a failed write, or the script refusing to write the error directory page because it could not read the old one back. That directory is appended to, never overwritten: every row on it is somebody else's error report, so the script reads the page, adds this run's row, and writes the whole page. Only a genuine 404 (`wiki-get` exit 4) means the page is not there yet and lets it build one from the template. An invalid key (exit 7) or any other API failure (exit 8) leaves the old rows unknown, so it skips the directory write and names the code instead — writing a fresh template over a directory it never read would erase every earlier report, with no merge and no backup behind it. A scanned error with `jsc=false` belongs to a third-party hook: report it and leave it alone. Skip this step when every CLI passed all five stages. Done when every error carries one `ERROR_{HASH}` result — a page name with its URL, a page name plus the reason the URL is missing, or the recorded reason no page was written — and one repair PR URL against `develop`.
|
||||
4. Report five results per CLI — purge, wiring, status, smoke, scan — each with the reason its script printed, plus the smoke `lines` count, any `ERROR_{HASH}` page name and every repair PR URL. Done when every detected CLI appears with one verdict per stage and every repair has a PR against `develop`.
|
||||
5. Record how the whole install ended. Run `tools/report-status.sh skill-end jsc-hooks:hooks-install {status} {exit} "{detail}"` — the script is in this same repo, so it takes the plain `tools/` path that every other stage above uses. **The main agent makes this one call, after every per-CLI report is in.** The per-CLI pipelines run as parallel sub agents and one skill run is one event, so a call inside those sub agents would write one line per CLI and turn the install's outcome into five contradictory ones. The gate that records a skill's start fires when the skill is loaded and can never see how it ended; without this line a finished install and an install abandoned halfway look identical afterwards, which is the whole reason the closing step exists.
|
||||
- `{status}` is one of five. `ok`: every detected CLI passed all five stages and every one of them reported `wired` — in practice that means kiro was not on the machine. `degraded`: the pipeline ran to the end and part of it did not reach `wired`. That covers kiro, which is `degraded` by design because the CLI cannot block a skill call, and it covers a CLI whose stage failed and was handed to `jsc-hooks:repair` with a PR against `develop` — the failure has an owner and a fix in flight, so the install is incomplete, not broken. A `skipped` CLI belongs here too. `failed`: a stage failed and the failure was left with nobody holding it — `jsc-hooks:repair` could not be started, or it came back with no PR — so a broken hook stays wired and nothing is going to fix it. `blocked`: `wire-cli.sh` refused with exit 6 under `JSC_READONLY=1`, so no CLI was purged or wired at all. `aborted`: step 1 detected no CLI, so there was nothing to wire and the run stopped on a precondition rather than on an error.
|
||||
- Take `{exit}` from the stage that decided the ending — the `wire-cli.sh`, `smoke` or `scan-hook-errors.sh` code — and otherwise use 0 for `ok` and 1 for every other status. `{detail}` is optional, one line, at most 200 characters: the CLI count per verdict, or the CLI and stage that failed. Never fold the five per-CLI reports into it; those go to the user in step 4.
|
||||
- Reporting never changes the install. `report-status.sh` swallows its own write failures and always exits 0, and an absent file is skipped in silence — the same rule the nine hooks follow, and for the same reason: a reporter that can fail the thing it reports on is worse than no reporter. Done when the one call was made, or the script was absent and this step was skipped without a word.
|
||||
|
||||
## Notes
|
||||
|
||||
|
||||
@@ -16,3 +16,7 @@ This skill is exempt from the version guard and the post-deploy restart gate, be
|
||||
3. Pick the smallest repair that makes the wiring pass, then apply it in the `hooks` repo. When the fix touches wiring behaviour, update `hooks/tools/wire-cli.sh`, `hooks/skills/hooks-install/SKILL.md` and `hooks/README.md` in the same change. Run `tools/wire-cli.sh smoke {cli}` for the affected CLI: exit 0 means the repair holds, exit 4 means it does not — go back to step 2 with the new output, exit 2 means a bad CLI name, so fix the name and rerun. Done when the fix is on disk and smoke exits 0.
|
||||
4. Run `jsc-meta/tools/sync-skill-manifest.sh .` from the repo root. Exit 0 means the README skill list and all three manifests carry the same new version. Exit 1 means a missing path, a missing `JSC-SKILLS` marker or an unreadable manifest — fix the named file and rerun. Exit 2 means a usage error, so pass exactly one path. Any other exit code is an environment fault, never a successful sync: stop and report it. Done when the script exits 0 and the three manifests show the same version.
|
||||
5. Commit, push and open a PR with `jsc-git:pr` against `develop`. When `jsc-git:pr` returns no PR URL, report the repair as applied but unmerged, name the branch that holds it, and hand back the failure reason — never claim a PR exists. Done when a PR URL comes back, or the branch name and the failure reason are both reported.
|
||||
6. Record how the repair ended. Run `tools/report-status.sh skill-end jsc-hooks:repair {status} {exit} "{detail}"` — the script is in this same repo, so it takes the plain `tools/` path, like `tools/wire-cli.sh` in step 3. This step runs on every route out of steps 1 to 5, the ones that stopped early included. What records a skill's start fires when the skill is loaded and cannot see how it ended, so a repair that never writes this line is indistinguishable afterwards from one that was abandoned with a hook still broken.
|
||||
- `{status}` is one of five. `ok`: the fix is on disk, `wire-cli.sh smoke` exits 0 for every affected CLI, `sync-skill-manifest.sh` exits 0 with all three manifests on the same version, and a PR URL against `develop` came back. `degraded`: the repair holds — smoke exits 0 — but the change did not get all the way out, because `jsc-git:pr` returned no PR URL and the fix is sitting on a branch, or `sync-skill-manifest.sh` left the manifests unaligned. `failed`: the hook could not be repaired. Smoke still exits 4 after the diagnosis loop of step 2 came back around, or step 4 hit an environment fault, so the broken wiring is still broken. `aborted`: there was nothing to repair — step 1 found no failure context, no `ERROR_{HASH}` page and no failed `status=` line, so the run stopped on a precondition rather than on a fault. `blocked` does not arise: this skill is exempt from the version guard and the post-deploy restart gate, which are the only two gates that could hold it, and that exemption exists precisely because it is the way back from a broken hook.
|
||||
- Take `{exit}` from whatever decided the ending — the `wire-cli.sh smoke` or `sync-skill-manifest.sh` code — and otherwise use 0 for `ok` and 1 for every other status. `{detail}` is optional, one line, at most 200 characters: the hook and CLI that were repaired, or the branch that holds an unmerged fix. Diagnosis output and diffs never go on this line.
|
||||
- Reporting never changes the repair. `report-status.sh` swallows its own write failures and always exits 0, and an absent file is skipped in silence, so a missing reporter can never be the reason a repaired hook reads as unrepaired. Done when the call was made, or the script was absent and this step was skipped without a word.
|
||||
|
||||
Reference in New Issue
Block a user