Merge pull request 'release: 發布 Codex hook 路徑修補' (#51) from release/codex-hook-root into master
Reviewed-on: #51 Reviewed-by: 系統管理員 <1+admin@noreply.localhost>
This commit was merged in pull request #51.
This commit is contained in:
@@ -1,6 +1,6 @@
|
||||
{
|
||||
"name": "jsc-hooks",
|
||||
"version": "0.2.9",
|
||||
"version": "0.3.1",
|
||||
"description": "跨 CLI hooks：STE100 語言強制、工時計時、技能用量記錄、SDLC 模型鎖、版本前置檢查、註解範圍守門、繁中編碼守門、部署後強制重啟",
|
||||
"skills": "./skills",
|
||||
"author": {
|
||||
|
||||
@@ -1,6 +1,6 @@
|
||||
{
|
||||
"name": "jsc-hooks",
|
||||
"version": "0.2.9",
|
||||
"version": "0.3.1",
|
||||
"description": "跨 CLI hooks：STE100 語言強制、工時計時、技能用量記錄、SDLC 模型鎖、版本前置檢查、註解範圍守門、繁中編碼守門、部署後強制重啟",
|
||||
"skills": "./skills",
|
||||
"jsc": {
|
||||
|
||||
@@ -115,7 +115,7 @@ Claude 由 `hooks/hooks.json` 自動接線八支 hook；其他 CLI 用 `hooks-in
|
||||
| `tools/jsc-wrap.sh` | 沒有完整 hook 系統的 CLI 的包裝啟動器：匯出 `JSC_CLI`、`JSC_SESSION_ID`，前後接 `session-timer.sh`，結束時自動跑 `scan-logs.sh` 回填，再依序跑一次 `comment-scope.sh sweep` 與 `lang-guard.sh sweep` 掃整個 git 工作區的註解範圍與繁中編碼（copilot 與 antigravity 沒有任何逐輪事件，整個工作階段只有這裡掃得到）。兩次收尾掃描一律不影響結束碼：包裝器原樣回傳 CLI 自己的結束碼，`sweep` 命中只把警告印到 stderr。`JSC_CLI` 存 CLI 代號，實際執行的是對應的執行檔（antigravity 是 agy、kiro 是 kiro-cli） |
|
||||
| `tools/scan-logs.sh` | 離線回填：解析 copilot、antigravity、codex 的原生日誌，把技能用量與階段界線補進 `$JSC_HOME`，重掃不重複 |
|
||||
| `tools/report-error.sh` | 失敗回報流程：把一筆 hook 或工具異常寫成 wiki 的 `ERROR_{HASH}`，並在 `ERROR_CONTENTS` 附上一列索引。wiki 位置由 `jsc-gitea` 的 `gitea.sh wiki-repo ERROR` 解析，解析不出來就安靜降級。由操作者手動執行，或由 `hooks-install` 在 `wire-cli.sh` 回報 `status=failed` 時執行；**不接在失敗的 hook 上自動觸發**（hook 一律安靜 exit 0，自我回報會疊出迴圈） |
|
||||
| `tools/wire-cli.sh` | 單一 CLI 的 hook 生命週期，共三個用法。`{cli}` 是接線：先建立或更新 `$JSC_HOME/current/jsc-hooks` 指向目前這版 plugin，接著把對應的設定編輯、包裝別名安裝、hook 檔建立成穩定路徑，皆以 `<!-- jsc-hooks -->`（或 `# jsc-hooks`）標記整段重寫，重跑等同先移除再重裝；寫完每個檔案會重讀驗證位置正確才回報成功（codex 的 `notify` 必須是根層鍵、kiro 的 JSON 必須成對且 `on`、`run` 在最上層），也會確認寫入路徑能解到既有腳本。檔案系統不能建立 symlink 時，會明確回報並退回目前根目錄，不會靜默寫出壞路徑。`status=wired\|degraded\|skipped\|failed` 回報接線結果。`purge {cli}` 是移除：把該 CLI 的**所有** hook 清掉，含非 jsc 的第三方項目，動到的檔案先原樣備份到 `$JSC_HOME/backup/hooks/{cli}/{yyyyMMdd_HHmmss}/`，備份失敗就不移除，移除後重讀驗證，驗不過自動還原備份，以 `status=purged\|skipped\|failed` 回報。`smoke {cli}` 是執行期冒煙測試：八支 hook 的每個接線模式各跑一次，非零退出即為錯誤，另外用一份暫時的 `$JSC_HOME` 狀態檔把工作包歸屬的五條判定路徑與重啟閘門的十二條判定與清除路徑各跑一次並比對結束碼，驗的是判定結果本身，不只是腳本跑得完（例外有三個：`sdlc-gate.sh check` 的 exit 2 是階段鎖的設計行為，`comment-scope.sh` 與 `lang-guard.sh` 掃描模式的 exit 2 是掃到違規的設計行為——`sweep` 在髒工作區本來就會回 2，不算 hook 壞掉），以 `status=ok\|failed` 回報。`status {cli}` 是唯讀盤點：只讀設定檔判斷標記段落在不在，不寫檔也不執行 hook，每個接線點印一行 `item<TAB>{項目}<TAB>{路徑}<TAB>{present\|missing}`，也會把帶版號快取路徑、開發存取庫路徑與不存在的腳本列為缺項；`status claude` 讀 Claude Code 實際載入的 `installed_plugins.json`，不再檢查目前腳本旁邊那份 `hooks.json`。體檢類技能（`/jsc-cli:doctor`）只能用這個子命令，另外三個都會動到環境 |
|
||||
| `tools/wire-cli.sh` | 單一 CLI 的 hook 生命週期，共三個用法。`{cli}` 是接線：先建立或更新 `$JSC_HOME/current/jsc-hooks` 指向目前這版 plugin，接著把對應的設定編輯、包裝別名安裝、hook 檔建立成穩定路徑，皆以 `<!-- jsc-hooks -->`（或 `# jsc-hooks`）標記整段重寫，重跑等同先移除再重裝；寫完每個檔案會重讀驗證位置正確才回報成功（codex 的 `notify` 必須是根層鍵、kiro 的 JSON 必須成對且 `on`、`run` 在最上層），也會確認寫入路徑能解到既有腳本。檔案系統不能建立 symlink 時，會明確回報並退回目前根目錄，不會靜默寫出壞路徑。`status=wired\|degraded\|skipped\|failed` 回報接線結果。`purge {cli}` 是移除：把該 CLI 的**所有** hook 清掉，含非 jsc 的第三方項目，動到的檔案先原樣備份到 `$JSC_HOME/backup/hooks/{cli}/{yyyyMMdd_HHmmss}/`，備份失敗就不移除；移除標記段落時會先去掉標記行前後空白，所以縮排或尾端補空白的 jsc 區塊一樣會移除；移除後重讀驗證，驗不過自動還原備份，以 `status=purged\|skipped\|failed` 回報。`smoke {cli}` 是執行期冒煙測試：八支 hook 的每個接線模式各跑一次，非零退出即為錯誤，另外用一份暫時的 `$JSC_HOME` 狀態檔把工作包歸屬的五條判定路徑與重啟閘門的十二條判定與清除路徑各跑一次並比對結束碼，驗的是判定結果本身，不只是腳本跑得完（例外有三個：`sdlc-gate.sh check` 的 exit 2 是階段鎖的設計行為，`comment-scope.sh` 與 `lang-guard.sh` 掃描模式的 exit 2 是掃到違規的設計行為——`sweep` 在髒工作區本來就會回 2，不算 hook 壞掉），以 `status=ok\|failed` 回報。`status {cli}` 是唯讀盤點：只讀設定檔判斷標記段落在不在，不寫檔也不執行 hook，每個接線點印一行 `item<TAB>{項目}<TAB>{路徑}<TAB>{present\|missing}`，也會把帶版號快取路徑、開發存取庫路徑與不存在的腳本列為缺項；`status claude` 讀 Claude Code 實際載入的 `installed_plugins.json`，不再檢查目前腳本旁邊那份 `hooks.json`。體檢類技能（`/jsc-cli:doctor`）只能用這個子命令，另外三個都會動到環境 |
|
||||
| `tools/scan-hook-errors.sh` | 掃 CLI 原生紀錄找 hook 的執行期錯誤（接線寫對、跑起來出錯）。只有 claude 有 hook 結果紀錄，掃 `~/.claude/projects/**/*.jsonl` 的 `hook_non_blocking_error` 與非空 `hookErrors`；codex、copilot、antigravity、kiro 沒有等價紀錄，一律回報 `unavailable` 並指向 `wire-cli.sh smoke {cli}`。每筆錯誤附加一行 JSON 到 `$JSC_HOME/errors/hooks.jsonl`，`jsc` 欄位標明是不是 jsc 自己的 hook（第三方 hook 的錯誤只回報，不由 jsc 修正）；去重與 `scan-logs.sh` 同法，重掃只讀新增段落，以 `status=clean\|errors\|unavailable` 回報 |
|
||||
|
||||
## 失敗回報範本
|
||||
|
||||
+14
-14
@@ -5,7 +5,7 @@
|
||||
"hooks": [
|
||||
{
|
||||
"type": "command",
|
||||
"command": "sh \"${CLAUDE_PLUGIN_ROOT}/hooks/session-timer.sh\" start"
|
||||
"command": "sh -c 'root=\"${CLAUDE_PLUGIN_ROOT:-${JSC_HOME:-$HOME/.jsc}/current/jsc-hooks}\"; exec sh \"$root/hooks/session-timer.sh\" start'"
|
||||
}
|
||||
]
|
||||
}
|
||||
@@ -15,23 +15,23 @@
|
||||
"hooks": [
|
||||
{
|
||||
"type": "command",
|
||||
"command": "sh \"${CLAUDE_PLUGIN_ROOT}/hooks/ste100-guard.sh\""
|
||||
"command": "sh -c 'root=\"${CLAUDE_PLUGIN_ROOT:-${JSC_HOME:-$HOME/.jsc}/current/jsc-hooks}\"; exec sh \"$root/hooks/ste100-guard.sh\"'"
|
||||
},
|
||||
{
|
||||
"type": "command",
|
||||
"command": "sh \"${CLAUDE_PLUGIN_ROOT}/hooks/sdlc-gate.sh\" check"
|
||||
"command": "sh -c 'root=\"${CLAUDE_PLUGIN_ROOT:-${JSC_HOME:-$HOME/.jsc}/current/jsc-hooks}\"; exec sh \"$root/hooks/sdlc-gate.sh\" check'"
|
||||
},
|
||||
{
|
||||
"type": "command",
|
||||
"command": "sh \"${CLAUDE_PLUGIN_ROOT}/hooks/sdlc-gate.sh\" wp-check prompt"
|
||||
"command": "sh -c 'root=\"${CLAUDE_PLUGIN_ROOT:-${JSC_HOME:-$HOME/.jsc}/current/jsc-hooks}\"; exec sh \"$root/hooks/sdlc-gate.sh\" wp-check prompt'"
|
||||
},
|
||||
{
|
||||
"type": "command",
|
||||
"command": "sh \"${CLAUDE_PLUGIN_ROOT}/hooks/comment-scope.sh\" prompt"
|
||||
"command": "sh -c 'root=\"${CLAUDE_PLUGIN_ROOT:-${JSC_HOME:-$HOME/.jsc}/current/jsc-hooks}\"; exec sh \"$root/hooks/comment-scope.sh\" prompt'"
|
||||
},
|
||||
{
|
||||
"type": "command",
|
||||
"command": "sh \"${CLAUDE_PLUGIN_ROOT}/hooks/lang-guard.sh\" prompt"
|
||||
"command": "sh -c 'root=\"${CLAUDE_PLUGIN_ROOT:-${JSC_HOME:-$HOME/.jsc}/current/jsc-hooks}\"; exec sh \"$root/hooks/lang-guard.sh\" prompt'"
|
||||
}
|
||||
]
|
||||
}
|
||||
@@ -41,7 +41,7 @@
|
||||
"hooks": [
|
||||
{
|
||||
"type": "command",
|
||||
"command": "sh \"${CLAUDE_PLUGIN_ROOT}/hooks/session-timer.sh\" mark"
|
||||
"command": "sh -c 'root=\"${CLAUDE_PLUGIN_ROOT:-${JSC_HOME:-$HOME/.jsc}/current/jsc-hooks}\"; exec sh \"$root/hooks/session-timer.sh\" mark'"
|
||||
}
|
||||
]
|
||||
}
|
||||
@@ -51,7 +51,7 @@
|
||||
"hooks": [
|
||||
{
|
||||
"type": "command",
|
||||
"command": "sh \"${CLAUDE_PLUGIN_ROOT}/hooks/session-timer.sh\" mark"
|
||||
"command": "sh -c 'root=\"${CLAUDE_PLUGIN_ROOT:-${JSC_HOME:-$HOME/.jsc}/current/jsc-hooks}\"; exec sh \"$root/hooks/session-timer.sh\" mark'"
|
||||
}
|
||||
]
|
||||
}
|
||||
@@ -62,15 +62,15 @@
|
||||
"hooks": [
|
||||
{
|
||||
"type": "command",
|
||||
"command": "sh \"${CLAUDE_PLUGIN_ROOT}/hooks/restart-gate.sh\""
|
||||
"command": "sh -c 'root=\"${CLAUDE_PLUGIN_ROOT:-${JSC_HOME:-$HOME/.jsc}/current/jsc-hooks}\"; exec sh \"$root/hooks/restart-gate.sh\"'"
|
||||
},
|
||||
{
|
||||
"type": "command",
|
||||
"command": "sh \"${CLAUDE_PLUGIN_ROOT}/hooks/version-guard.sh\""
|
||||
"command": "sh -c 'root=\"${CLAUDE_PLUGIN_ROOT:-${JSC_HOME:-$HOME/.jsc}/current/jsc-hooks}\"; exec sh \"$root/hooks/version-guard.sh\"'"
|
||||
},
|
||||
{
|
||||
"type": "command",
|
||||
"command": "sh \"${CLAUDE_PLUGIN_ROOT}/hooks/sdlc-gate.sh\" wp-check skill"
|
||||
"command": "sh -c 'root=\"${CLAUDE_PLUGIN_ROOT:-${JSC_HOME:-$HOME/.jsc}/current/jsc-hooks}\"; exec sh \"$root/hooks/sdlc-gate.sh\" wp-check skill'"
|
||||
}
|
||||
]
|
||||
}
|
||||
@@ -81,7 +81,7 @@
|
||||
"hooks": [
|
||||
{
|
||||
"type": "command",
|
||||
"command": "sh \"${CLAUDE_PLUGIN_ROOT}/hooks/skill-usage.sh\""
|
||||
"command": "sh -c 'root=\"${CLAUDE_PLUGIN_ROOT:-${JSC_HOME:-$HOME/.jsc}/current/jsc-hooks}\"; exec sh \"$root/hooks/skill-usage.sh\"'"
|
||||
}
|
||||
]
|
||||
},
|
||||
@@ -90,11 +90,11 @@
|
||||
"hooks": [
|
||||
{
|
||||
"type": "command",
|
||||
"command": "sh \"${CLAUDE_PLUGIN_ROOT}/hooks/comment-scope.sh\""
|
||||
"command": "sh -c 'root=\"${CLAUDE_PLUGIN_ROOT:-${JSC_HOME:-$HOME/.jsc}/current/jsc-hooks}\"; exec sh \"$root/hooks/comment-scope.sh\"'"
|
||||
},
|
||||
{
|
||||
"type": "command",
|
||||
"command": "sh \"${CLAUDE_PLUGIN_ROOT}/hooks/lang-guard.sh\""
|
||||
"command": "sh -c 'root=\"${CLAUDE_PLUGIN_ROOT:-${JSC_HOME:-$HOME/.jsc}/current/jsc-hooks}\"; exec sh \"$root/hooks/lang-guard.sh\"'"
|
||||
}
|
||||
]
|
||||
}
|
||||
|
||||
+1
-1
@@ -1,6 +1,6 @@
|
||||
{
|
||||
"name": "jsc-hooks",
|
||||
"version": "0.2.9",
|
||||
"version": "0.3.1",
|
||||
"description": "跨 CLI hooks：STE100 語言強制、工時計時、技能用量記錄、SDLC 模型鎖、版本前置檢查、註解範圍守門、繁中編碼守門、部署後強制重啟",
|
||||
"skills": "./skills/",
|
||||
"jsc": {
|
||||
|
||||
@@ -9,7 +9,7 @@ Goal: make the eight hooks (`ste100-guard.sh`, `session-timer.sh`, `skill-usage.
|
||||
|
||||
Install on a clean slate. Every CLI is purged of all hooks first, third-party ones included, so a later failure has exactly one owner. `tools/wire-cli.sh purge` backs up every file it touches before it removes anything, so the removal stays reversible.
|
||||
|
||||
The wiring commands stored in user config use `$JSC_HOME/current/jsc-hooks`, not the versioned plugin cache path and not the development checkout. `tools/wire-cli.sh {cli}` creates or refreshes that symlink before it writes `notify`, shell aliases or Kiro hook JSON, then verifies the linked scripts exist. If the filesystem cannot create the symlink, the script must say so and explicitly fall back to the current root; it must never write a silent broken path.
|
||||
The wiring commands stored in user config use `$JSC_HOME/current/jsc-hooks`, not the versioned plugin cache path and not the development checkout. `tools/wire-cli.sh {cli}` creates or refreshes that symlink before it writes `notify`, shell aliases or Kiro hook JSON, then verifies the linked scripts exist. If the filesystem cannot create the symlink, the script must say so and explicitly fall back to the current root; it must never write a silent broken path. 外掛提供的 `hooks/hooks.json` 也必須遵守同一條規則：主機有提供 `${CLAUDE_PLUGIN_ROOT}` 時才使用它；其他 CLI 讀取同一份 manifest 時，必須退回 `$JSC_HOME/current/jsc-hooks`，避免 Claude 專用變數未設定時展開成 `/hooks/...`。
|
||||
|
||||
Only claude has PreToolUse, PostToolUse and UserPromptSubmit, so only claude reports `wired`. On codex, copilot, antigravity and kiro neither the version guard nor the post-deploy restart gate can be wired at all, and the SDLC gate degrades to the skill-step check, so all four report `degraded` — report that gap as the script words it instead of implying every CLI is covered. On those four the restart gate blocks no skill call whatsoever: the state file is still written and still cleared at the next session start, so the restart itself rests on the `jsc-cli:deploy` closing message.
|
||||
|
||||
@@ -33,7 +33,7 @@ The detailed flow **MUST run as a sub agent**; the main agent only reports the s
|
||||
## Steps
|
||||
|
||||
1. Run `jsc-cli/tools/detect-clis.sh`. Done when you hold the list of installed CLIs; when the list is empty, report that and stop.
|
||||
2. For each installed CLI, run `tools/wire-cli.sh purge {cli}`. The script backs up every file it touches, removes all hooks, re-reads each file to confirm the removal, and restores the backup by itself when a check fails. Done when every CLI has printed exactly one `status=purged|skipped|failed reason=...` line and you have noted the backup directory path from its `[jsc]` output.
|
||||
2. For each installed CLI, run `tools/wire-cli.sh purge {cli}`. The script backs up every file it touches, removes all hooks, re-reads each file to confirm the removal, and restores the backup by itself when a check fails. Marker matching trims leading and trailing whitespace, so an indented or padded marker block is still removed as the same jsc-owned block. 對 Codex 而言，後續 `status` 也必須回報已安裝的 `jsc-hooks` manifest 是否仍含有舊版 `UserPromptSubmit` command，因為它可能把 `${CLAUDE_PLUGIN_ROOT}` 展開成 `/hooks/...`。Done when every CLI has printed exactly one `status=purged|skipped|failed reason=...` line and you have noted the backup directory path from its `[jsc]` output.
|
||||
3. For each installed CLI, run `tools/wire-cli.sh {cli}`. The script owns both the wiring and its verification: it refreshes `$JSC_HOME/current/jsc-hooks`, writes the config, alias or hook file inside a `<!-- jsc-hooks -->` (or `# jsc-hooks`) marker block, re-reads every file it wrote, confirms the block is present and correctly placed, and confirms the stored runtime paths resolve to existing scripts before it prints a success status. Trust its first line, `status=wired|degraded|skipped|failed reason=...`. Exit 2 means a bad CLI name, not a wiring outcome — fix the name and rerun. Done when every installed CLI has printed exactly one `status=` line and none exited 2.
|
||||
4. For each installed CLI, run `tools/wire-cli.sh smoke {cli}`. This runs all eight hooks once each, every wired mode included, plus each decision path of the work-package check and of the restart gate, and catches what the wiring check cannot see: a hook that is wired correctly and still fails when it executes. Done when every CLI has printed one `status=ok|failed reason=...` line plus 31 result lines: 14 hook mode lines, 5 work-package decision lines, and 12 restart-gate decision and cleanup lines. The line count is higher than the hook count because `sdlc-gate.sh`, `comment-scope.sh` and `lang-guard.sh` each have multiple wired modes.
|
||||
5. For each installed CLI, run `tools/scan-hook-errors.sh --cli {cli}`. Only claude keeps hook results in its native records and can answer `clean` or `errors`; codex, copilot, antigravity and kiro answer `unavailable`, and their runtime evidence comes from step 4 alone. Done when every CLI has printed one `status=clean|errors|unavailable reason=...` line and the four `unavailable` CLIs are reported as exactly that, not as clean.
|
||||
|
||||
@@ -1,7 +1,8 @@
|
||||
#!/usr/bin/env sh
|
||||
# report-error.sh — 失敗回報流程：把一筆 hook 或工具異常寫成 wiki 的 ERROR_{HASH}，
|
||||
# 並在 ERROR_CONTENTS 附上一列索引。頁面內容套用 templates/ 的兩份範本，
|
||||
# 範本是文案的唯一來源，本腳本只填欄位。
|
||||
# 範本是文案的唯一來源，本腳本只填欄位；真正寫進 wiki 前，還會先走
|
||||
# Gitea 寫入確認。
|
||||
#
|
||||
# 用法:
|
||||
# report-error.sh --hook {名稱} --exit {碼} --summary {摘要}
|
||||
|
||||
+32
-4
@@ -188,6 +188,18 @@ has_lang_guard() {
|
||||
grep -qF "$_first" "$1" 2>/dev/null
|
||||
}
|
||||
|
||||
codex_plugin_hooks_json() {
|
||||
_base="${CODEX_HOME:-$HOME/.codex}/plugins/cache/jsc/jsc-hooks"
|
||||
[ -d "$_base" ] || return 1
|
||||
find "$_base" -path '*/hooks/hooks.json' -type f 2>/dev/null | sort | tail -n1
|
||||
}
|
||||
|
||||
codex_plugin_hooks_safe() {
|
||||
_hooks_json=$(codex_plugin_hooks_json || true)
|
||||
[ -n "$_hooks_json" ] || return 0
|
||||
! grep -qF 'command": "sh \"${CLAUDE_PLUGIN_ROOT}/hooks/' "$_hooks_json" 2>/dev/null
|
||||
}
|
||||
|
||||
# 以標記整段取代（冪等）；標記不存在就在檔尾新增；檔案不存在就建立。
|
||||
# 適用 markdown 規則檔與 shell rc 檔：這兩種檔案沒有「區段」概念，附在檔尾就對了。
|
||||
# $1=檔案 $2=開頭標記行 $3=結尾標記行 $4=標記之間要寫入的內容
|
||||
@@ -334,8 +346,13 @@ remove_block() {
|
||||
[ -f "$file" ] || return 0
|
||||
grep -qF "$bopen" "$file" 2>/dev/null || return 0
|
||||
awk -v bopen="$bopen" -v bshut="$bshut" '
|
||||
$0==bopen { skip=1; next }
|
||||
$0==bshut { skip=0; next }
|
||||
function trim(s) {
|
||||
sub(/^[ \t]+/, "", s)
|
||||
sub(/[ \t]+$/, "", s)
|
||||
return s
|
||||
}
|
||||
trim($0)==bopen { skip=1; next }
|
||||
trim($0)==bshut { skip=0; next }
|
||||
skip { next }
|
||||
{ print }
|
||||
' "$file" > "$file.jsc-tmp" 2>/dev/null || { rm -f "$file.jsc-tmp"; return 1; }
|
||||
@@ -350,8 +367,13 @@ remove_rc_blocks() {
|
||||
[ -f "$file" ] || return 0
|
||||
grep -q '^# jsc-hooks' "$file" 2>/dev/null || return 0
|
||||
awk '
|
||||
/^# jsc-hooks/ { skip=1; next }
|
||||
/^# \/jsc-hooks/ { skip=0; next }
|
||||
function trim(s) {
|
||||
sub(/^[ \t]+/, "", s)
|
||||
sub(/[ \t]+$/, "", s)
|
||||
return s
|
||||
}
|
||||
trim($0) ~ /^# jsc-hooks/ { skip=1; next }
|
||||
trim($0) ~ /^# \/jsc-hooks/ { skip=0; next }
|
||||
skip { next }
|
||||
{ print }
|
||||
' "$file" > "$file.jsc-tmp" 2>/dev/null || { rm -f "$file.jsc-tmp"; return 1; }
|
||||
@@ -976,6 +998,12 @@ if [ "$action" = status ]; then
|
||||
st_lang_guard lang-guard "${CODEX_HOME:-$HOME/.codex}/AGENTS.md"
|
||||
st_runtime_paths runtime-paths "$config" "# jsc-hooks" "# /jsc-hooks"
|
||||
st_runtime_paths alias-paths "$HOME/.bashrc" "# jsc-hooks:codex" "# /jsc-hooks:codex"
|
||||
_codex_plugin_hooks=$(codex_plugin_hooks_json || true)
|
||||
if codex_plugin_hooks_safe; then
|
||||
st_item plugin-user-prompt-root "${_codex_plugin_hooks:-${CODEX_HOME:-$HOME/.codex}/plugins/cache/jsc/jsc-hooks}" present
|
||||
else
|
||||
st_item plugin-user-prompt-root "$_codex_plugin_hooks" missing
|
||||
fi
|
||||
st_degrade="STE100 降級為 prompt 檔，SDLC 模型鎖降級為技能步驟檢查，無 pre-tool hook 可接版本前置檢查與部署後重啟閘門，註解範圍與繁中編碼改為每輪結束掃整個工作區，不是逐檔即時" ;;
|
||||
|
||||
copilot)
|
||||
|
||||
Reference in New Issue
Block a user